Effect of alcohols on the gamma-radiation-induced polymerization of ethylene

Gamma-radiation-induced polymerization of ethylene in alcohols such as methyl, ethyl, n-propyl, isopropyl, n-butyl, isobutyl, sec-butyl, tert-butyl, and n-pentyl alcohols was carried out under a pressure of 400 kg./cm.²at 30°C. at a dose rate of 1.4 × 10⁵ rad/hr. in a batch reactor of 100 ml. capacity. The yield and molecular weight of polymer formed in the alcohols (except tert-butyl alcohol) were much lower than those of the bulk polymerization under the same conditions, whereas the addition of tert-butyl alcohol increased the yield and reduced the molecular weight. From the infrared spectra of the polymers and those of the bromination products it was concluded that only primary OH exists in the polymer formed in methyl alcohol and that both primary and secondary OH are in the polymer formed in other primary alcohols. Both secondary and tertiary OH were observed in the polymer when the secondary alcohols were used, and only tertiary OH in the case of tert-butyl alcohol. These polymers were found to contain small amounts of vinylidene unsaturation and methyl group. On the basis of these results the roles of the alcohols in the polymerization are discussed.     

Quantum algebraic–combinatoric study of the conformational properties of n‐alkanes. I

Based on quantum chemical calculation results, four rules were previously derived for the numbers and the sequences of the conformers of free alkane molecules. This paper builds up first an algebra to handle the conformational problem of alkanes. Partitioning the set of all sequences, the whole problem is then subdivided into three independent subcases. With the help of an equivalence relation, the sequences can be classified. According to the quantum chemical rules, certain equivalence classes do not represent conformers. A welldefined subcase of the whole problem is solved.     

General synthesis and structural evolution of a layered family of Ln8(OH)20Cl4 x nH2O (Ln = Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, and Y)

The synthesis process and crystal structure evolution for a family of stoichiometric layered rare-earth hydroxides with general formula Ln(8)(OH)(20)Cl(4) x nH(2)O (Ln = Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, and Y; n approximately 6-7) are described. Synthesis was accomplished through homogeneous precipitation of LnCl(3) x xH(2)O with hexamethylenetetramine to yield a single-phase product for Sm-Er and Y. Some minor coexisting phases were observed for Nd(3+) and Tm(3+), indicating a size limit for this layered series. Light lanthanides (Nd, Sm, Eu) crystallized into rectangular platelets, whereas platelets of heavy lanthanides from Gd tended to be of quasi-hexagonal morphology. Rietveld profile analysis revealed that all phases were isostructural in an orthorhombic layered structure featuring a positively charged layer, [Ln(8)(OH)(20)(H(2)O)(n)](4+), and interlayer charge-balancing Cl(-) ions. In-plane lattice parameters a and b decreased nearly linearly with a decrease in the rare-earth cation size. The interlamellar distance, c, was almost constant (approximately 8.70 A) for rare-earth elements Nd(3+), Sm(3+), and Eu(3+), but it suddenly decreased to approximately 8.45 A for Tb(3+), Dy(3+), Ho(3+), and Er(3+), which can be ascribed to two different degrees of hydration. Nd(3+) typically adopted a phase with high hydration, whereas a low-hydration phase was preferred for Tb(3+), Dy(3+), Ho(3+), Er(3+), and Tm(3+). Sm(3+), Eu(3+), and Gd(3+) samples were sensitive to humidity conditions because high- and low-hydration phases were interconvertible at a critical humidity of 10%, 20%, and 50%, respectively, as supported by both X-ray diffraction and gravimetry as a function of the relative humidity. In the phase conversion process, interlayer expansion or contraction of approximately 0.2 A also occurred as a possible consequence of absorption/desorption of H(2)O molecules. The hydration difference was also evidenced by refinement results. The number of coordinated water molecules per formula weight, n, changed from 6.6 for the high-hydration Gd sample to 6.0 for the low-hydration Gd sample. Also, the hydration number usually decreased with increasing atomic number; e.g., n = 7.4, 6.3, 7.2, and 6.6 for high-hydration Nd, Sm, Eu, and Gd, and n = 6.0, 5.8, 5.6, 5.4, and 4.9 for low-hydration Gd, Tb, Dy, Ho, and Er. The variation in the average Ln-O bond length with decreasing size of the lanthanide ions is also discussed. This family of layered lanthanide compounds highlights a novel chemistry of interplay between crystal structure stability and coordination geometry with water molecules.     

Photodegradation mechanisms in poly(2,6-butylenenaphthalate-co-tetramethyleneglycol) (PBN-PTMG), Part III: Photodegradation induced by the carbonyl group in n, π excited states

In order to identify the initiation step in the photodegradation of poly(2,6-butylenenaphthalate)-block-poly(tetramethyleneglycol) (PBN-PTMG), we undertook its photolysis with monochromatic irradiation. We discuss the initiation reaction on the basis of the analytical results for the PBN-PTMG in the presence or absence of 2,2′-dihydroxy-4-methoxybenzophenone as a UV absorber, 2-hydroxy-4-methoxybenzophenone as a UV absorber, β-carotene as a quencher of singlet oxygen or methylene blue as a photosensitiser, respectively.The PBN-PTMG containing 2,2′-dihydroxy-4-methoxybenzophenone exhibits better resistance to the incident light of ca. 370 nm corresponding to the absorption of the n, π^* transition of the carbonyl group in the PBN block than the PBN-PTMG containing 2-hydroxy-4-methoxybenzophenone. The PBN-PTMG containing β-carotene shows similar photodegradation tendencies as that of the PBN-PTMG without β-carotene. In contrast, the PBN-PTMG with methylene blue is not degraded by monochromatic radiation in the range λ = 600-690 nm. These facts indicate that singlet oxygen does not participate in the initiation reaction of the photodegradation of the PBN-PTMG. Therefore, we concluded that the photodegradation of the PBN-PTMG is induced through the hydrogen abstraction by carbonyl groups in n, π^* excited states.     

Natural Sphingomonas glycolipids vary greatly in their ability to activate natural killer T cells

Mouse natural killer T (NKT) cells expressing an invariant T cell antigen receptor (TCR) recognize glycosphingolipids (GSLs) from Sphingomonas bacteria. The synthetic antigens previously tested, however, were designed to closely resemble the potent synthetic agonist alpha-galactosyl ceramide (alphaGalCer), which contains a monosaccharide and a C18:0 sphingosine lipid. Some Sphingomonas bacteria, however, also have oligosaccharide-containing GSLs, and they normally synthesize several GSLs with different sphingosine chains including one with a cyclopropyl ring-containing C21:0 (C21cycl) sphingosine. Here we studied the stimulation of NKT cells with synthetic GSL antigens containing natural tetrasaccharide sugars, or the C21cycl sphingosine. Our results indicate that there is a great degree of variability in the antigenic potency of different natural Sphingomonas glycolipids, with the C21cycl sphingosine having intermediate potency and the oligosaccharide-containing antigens exhibiting limited or no stimulatory capacity.     

Polymerization and copolymerization of functionalized 2‐alkoxy‐1‐methylenecyclopropanes to form new polymers having alkoxy substituents

The polymers with functionalized alkoxy groups and with narrow molecular weight distribution (M_w/M_n < 1.12) are obtained from the living polymerization of 2‐alkoxy‐1‐methylenecyclopropanes using π‐allylpalladium complex, [(PhC₃H₄)Pd(μ‐Cl)]₂, as the initiator. The polymers with oligoethylene glycol groups in the alkoxy substituent are soluble in water, and hydroboration of the C?C double bond and ensuing addition of the OH groups to C?N bond of alkyl isocyanate produce the polymers with urethane pendant groups. The reaction decreases solubility of the polymer in water significantly. Di‐ and triblock copolymers of the 2‐alkoxy‐1‐methylenecyclopropanes are prepared by consecutive addition of the two or three 2‐alkoxy‐1‐methylenecyclopropane monomers to the Pd initiator. The polymers which contain both hydrophobic butoxy or tert‐butoxy group and hydrophilic oligoethylene glycol group dissolve in water and/or organic solvents, depending on the substituents. The ¹H NMR spectrum of poly( 1a ‐b‐ 1h ) (? (CH₂C(?CH₂)CHOBu)_n? (CH₂C(?CH₂)CH(OCH₂CH₂)₃OMe)_m? ) in D₂O solution exhibits peaks because of the butoxy and ?CH₂ hydrogen in decreased intensity, indicating that the polymer forms micelle particles containing the hydrophilic segments in their external parts. Aqueous solution of the polymer with a small amount of DPH (DPH = 1,6‐diphenyl‐1,3,5‐hexatriene) shows the absorbance due to DPH at concentration of the polymer higher than 5.82 × 10^?5 g mL^?1. Other block copolymers such as poly( 1b ‐b‐ 1h ) and poly( 1a ‐b‐ 1g ) also form the micelles that contain DPH in their core. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 959–972, 2009     

Shape-Selective Alkylation of Isopropylnaphthalene over HM Zeolite. A Theoretical Study

A first principle quantum chemical method for determining the shape of molecules has been elaborated and its value in interpreting the experimentally found shape selectivity in isopropylation of isopropylnaphthalene on H-mordenite zeolite is demonstrated. In line with experimental results, it is found that 2,6-diisopropylnaphthalene is the most feasible product since it diffuses through the main channels of mordenite the easiest among the possible isomers.     

Enhancement in thermal stability and resistance to denaturants of lipase encapsulated in mesoporous silica with alkyltrimethylammonium (CTAB)

We assembled a highly durable conjugate with both a high-density accumulation and a regular array of lipase, by encapsulating it in mesoporous silica (FSM) with alkyltrimethylammonium (CTAB) chains on the surface. The activity for hydrolyzing esters of the lipase immobilized in mesoporous silica was linearly related to the concentration of lipase, whereas that of non-immobilized lipase showed saturation due to self-aggregation at a high concentration. The lipase conjugate also had increased resistance to heating when stayed in the silica coupling with CTAB. In addition, encapsulating the enzyme with FSM coupled CTAB caused the lipase to remain stable even in the presence of urea and trypsin, suggesting that the encapsulation prevented dissociation and denaturing. This conjugate had much higher activity and much higher stability for hydrolyzing esters when compared to the native lipase. These results show that FSM provides suitable support for the immobilization and dispersion of proteins in mesopores with disintegration of the aggregates.     

Use of zeolite to refold a disulfide-bonded protein

Zeolites are microporous crystalline aluminosilicates with a highly ordered structure. Using zeolite beta as an adsorbent, denatured/reduced hen egg lysozyme was refolded to the active form at high concentrations. The denatured/reduced lysozyme was adsorbed onto the zeolite and the protein was refolded by desorbing it into refolding buffer, consisting of redox reagents, guanidine hydrochloride, polyethylene glycol, and L-arginine. This zeolite refolding method could be highly effective for various kinds of proteins, refolding them with high efficiency even when they contain disulfide bonds.     

Experimental visualization of lithium conduction pathways in garnet-type Li(7)La(3)Zr(2)O(12)

The evolution of the Li-ion displacements in the 3D interstitial pathways of the cubic garnet-type Li(7)La(3)Zr(2)O(12), cubic Li(7)La(3)Zr(2)O(12), was investigated with high-temperature neutron diffraction (HTND) from RT to 600 °C; the maximum-entropy method (MEM) was applied to estimate the Li nuclear-density distribution. Temperature-driven Li displacements were observed; the displacements indicate that the conduction pathways in the garnet framework are restricted to diffusion through the tetrahedral sites of the interstitial space.